REF 409830
JWE-120 (*)
Polymetaal
The presses in the JW-series are designed for heavy duty use in, for example, printmaking studios. The upper roller is spring mounted making it suitable for relief printing. Shims of leather or cardboard can be placed under the spindles, thus providing more flexibility during printing. The hard synthetic bed plate runs, without play, between adjustable right angled guide strips which are mounted to the side frames.
This press has the following features:
Driven by electric motor, 220V, 750W, single speed
Control panel included left, right and stop button
Electronic safety-system on top roller, operated by lightsensors. Light beam interruption shuts off motor. A protection system is required by law, under CE regulations.
Bed size 120 x 220cm
Bed thickness 2 cm
Length of roller 120 cm
Diameter upper roller 20 cm
Diameter of lower roller 20 cm
Wall thickness of rollers 2,2 cm
- Length (of side frames) 192 cm
- Width (incl. star wheel) 170 cm
- Height 160 cm
Electric voltage AC 220V
Motor power 750 Watt
Speed of motor 1400 RPM
Printing speed 2,5cm/sec
Max. opening between bed and upper roller 10 cm
Screw thread of pressure spindles (metric) M 30
Weight of the press 700 kg
To ask for a quotation, please fill in the form
- Technique
- Block printing
Etching engraving
Monotype
Plate lithography